Diagnostic value of serum COMP and ADAMTS7 for intervertebral disc degeneration.

OBJECTIVE: Intervertebral disc degeneration (IVDD) is a major cause of morbidity and disability. Our study aimed to investigate the potential of cartilage oligomeric matrix protein (COMP) and ADAMTS7 (A disintegrin and metalloproteinases with thrombospondin motifs 7) as biomarkers for IVDD together with their functional relationship. METHODS: IVD tissues and peripheral blood samples were collected from IVDD rabbit models over 1-4 weeks. Tissues and blood samples were also collected from clinical patients those were stratified into four equal groups according to Pfirrmann IVDD grading (I-V) with baseline data collected for each participant. COMP and ADAMTS7 expression were analyzed and biomarker characteristics were assessed using linear regression and receiver operating curve (ROC) analyses. RESULTS: COMP and ADAMTS7 expression increased in tissues and serum during IVDD progression. Serum COMP (sCOMP) and serum ADAMTS7 (sADAMTS7) levels increased in a time-dependent manner following IVD damage in the rabbit model while significant positive correlations were detected between sCOMP and sADAMTS7 and Pfirrmann grade in human subjects. ROC analysis showed that combining sCOMP and sADAMTS7 assay results produced an improved diagnostic measure for IVDD compared to individual sCOMP or sADAMTS7 tests. In vitro assays conducted on human cell isolates revealed that COMP prevented extracellular matrix degradation and antagonized ADAMTS7 expression although this protective role was uncoupled under microenvironmental conditions mimicking IVDD. CONCLUSIONS: Increases in circulating COMP and ADAMTS7 correlate with IVDD progression and may play regulatory roles. Assays for sCOMP and/or sADAMTS7 levels can discriminate between healthy subjects and IVDD patients, warranting further clinical assessment.

FSTL1 Accelerates Nucleus Pulposus Cell Senescence and Intervertebral Disc Degeneration Through TLR4/NF-κB Pathway.

Intervertebral disc degeneration (IVDD) is a major contributor to low back pain (LBP), and inflammatory factors play crucial roles in its pathogenesis. Follistatin-like 1 (FSTL1) has been reported to induce an inflammatory response in chondrocytes, microglia and preadipocytes, but its role in the pathogenesis of nucleus pulposus cell (NPC) degeneration remains unclear. In this study, we mainly utilized an acidosis-induced NPC degeneration model and a rabbit puncture IVDD model to investigate the role of FSTL1 in IVDD both in vitro and in vivo. We confirmed that FSTL1 expression significantly increased in nucleus pulposus (NP) tissues from IVDD patients and rabbit puncture IVDD models. The expression levels of FSTL1 were significantly increased in all three models of NPC degeneration under harsh microenvironments. In addition, recombinant human FSTL1 (rh-FSTL1) was found to upregulate the expression of p16 and p21, increase the number of senescence-associated ß-galactosidase (SA-ß-gal)-positive cells, induce senescence-related secretory phenotypes (SASP), and downregulate extracellular matrix (ECM) protein expressions, leading to an imbalance in ECM metabolism destructions. Conversely, silencing of FSTL1 by small interfering RNA (siRNA) ameliorated senescence of NPCs associated with inflammation in IVDD. Furthermore, Toll-like receptor 4/nuclear factor-κB (TLR4/NF-κB) pathway plays a crucial role in regulating NPC senescence through FSTL1 regulation. Inhibition of TLR4 expression partly reversed the effects of rh-FSTL1 on NPC senescence-associated inflammation. Finally, rabbit IVDD model experiments demonstrated that the specific FSTL1 siRNA markedly repressed the development of IVDD. These findings may offer a therapeutic approach for mitigating inflammation-induced senescence associated with IVDD.

Comparative effectiveness of nonpharmacological interventions in reducing psychological symptoms among patients with chronic low back pain.

OBJECTIVES: Chronic low back pain (CLBP) can seriously impair the quality of life of patients and has a remarkable comorbidity with psychological symptoms, which, in turn, can further exacerbate the symptoms of CLBP. Psychological treatments are critical and nonnegligent for the management of CLBP, and thus, should attract sufficient attention. However, current evidence does not suggest the superiority and effectiveness of nonpharmacological interventions in reducing psychological symptoms among patients with CLBP.Thus, this study was designed to compare the effectiveness of nonpharmacological interventions for depression, anxiety, and mental health among patients with CLBP and to recommend preferred strategies for attenuating psychological symptoms in clinical practice. METHODS: In this systematic review and network meta-analysis (NMA), PubMed, Embase Database, Web of Science, and Cochrane Library were searched from database inception until March 2022. Randomized clinical trials (RCTs) that compare different nonpharmacological interventions for depression, anxiety, and mental health among patients with CLBP were eligible. The Preferred Reporting Items for Systematic Reviews and Meta-analyses statement was used. Four reviewers in pairs and divided into two groups independently performed literature selection, data extraction, and risk of bias, and certainty of evidence assessments. This NMA was conducted with a random effects model under a frequentist framework. The major outcomes were depression, anxiety, and mental health presented as the standardized mean difference (SMD) with the corresponding 95% CI. RESULTS: A total of 66 RCTs that randomized 4806 patients with CLBP met the inclusion criteria. The quality of evidence was typically low or some risks of bias (47 out of 66 trials, 71.3%), and the precision of summary estimates for effectiveness varied substantially. In addition, 7 categories of interventions with 26 specific treatments were evaluated. For depression, mind body therapy (pooled SMD = -1.20, 95% CI: -1.63 to -0.78), biopsychosocial approach (pooled SMD = -0.41, 95% CI: -0.70 to -0.12), and physical therapy (pooled SMD = -0.26, 95% CI: -0.50 to -0.02) exhibited remarkable effectiveness in reducing depression compared with the control group. For managing anxiety, mind body therapy (pooled SMD = -1.35, 95% CI: -1.90 to -0.80), multicomponent intervention (pooled SMD = -0.47, 95% CI: -0.88 to -0.06), and a biopsychosocial approach (pooled SMD = -0.46, 95% CI: -0.79 to -0.14) were substantially superior to the control group. For improving mental health, multicomponent intervention (pooled SMD = 0.77, 95% CI: 0.14 to 1.39), exercise (pooled SMD = 0.60, 95% CI: 0.08 to 1.11), and physical therapy (pooled SMD = 0.47, 95% CI: 0.02-0.92) demonstrated statistically substantial effectiveness compared with the control group. The rank probability indicated that mind body therapy achieved the highest effectiveness in reducing depression and anxiety among patients with CLBP. Besides, the combined results should be interpreted cautiously based on the results of analyses evaluating the inconsistency and certainty of the evidence. CONCLUSION: This systemic review and NMA suggested that nonpharmacological interventions show promise for reducing psychological symptoms among patients with CLBP. In particular, mind body therapy and a biopsychosocial approach show considerable promise, and mind body therapy can be considered a priority choice in reducing depression and anxiety. These findings can aid clinicians in assessing the potential risks and benefits of available treatments for CLBP comorbidity with psychological symptoms and provide evidence for selecting interventions in clinical practice. More RCTs involving different interventions with rigorous methodology and an adequate sample size should be conducted in future research.

Characteristics and evaluation of C1 posterior arch variation for transpedicular screw placement between patients with and without basilar invagination.

BACKGROUND: C1 transpedicular screw (C1TS) placement provided satisfactory pullout resistance and 3D stability, but its application might be limited in patients with basilar invagination (BI) due to the high incidences of the atlas anomaly and vertebral artery (VA) variation. However, no study has explored the classifications of C1 posterior arch variations and investigated their indications and ideal insertion trajectories for C1TS in BI. PURPOSE: To investigate the bony and surrounding arterial characteristics of the atlas, classify posterior arch variations, identify indications for C1TS, evaluate ideal insertion trajectories for C1TS in BI patients without atlas occipitalization (AO), and compare them with those without BI and AO as control. METHODS: A total of 130 non-AO patients with and without BI (52 patients and 78 patients, respectively) from two medical centers were included at a 1:1.5 ratio. The posterior arch variations were assessed using a modified C1 morphological classification. Comparisons regarding the bony and surrounding arterial characteristics, morphological classification distributions, and ideal insertion trajectories between BI and control groups were performed. The subgroup analyses based on different morphological classifications were also conducted. In addition, the factors possibly affecting the insertion parameters were investigated using multiple linear regression analyses. RESULTS: The BI group was associated with significantly smaller lateral mass height and width, sagittal length of posterior arch, pedicle height, vertical height of posterior arch, and distance between VA and VA groove (VAG) than control group. Four types of posterior arch variations with indications for different screw placement techniques were classified; Classifications I and II were suitable for C1TS. The BI cohort showed a significantly lower rate of Classification I than the control cohort. In the BI group, the subgroup of Classification I had significantly larger distance between the insertion point (IP) and inferior aspect of the posterior arch. In addition, it had the narrowest width along ideal screw trajectory, but a significantly more lateral ideal mediolateral angle than the subgroup of Classification II. Multiple linear regression indicated that the cephalad angle was significantly associated with the diagnosis of BI (B = 3.708, P < 0.001) and sagittal diameter of C1 (B = 3.417, P = 0.027); the ideal mediolateral angle was significantly associated with BMI (B = 0.264, P = 0.031), sagittal diameter of C1 (B = - 4.559, P = 0.002), and pedicle height (B = - 2.317, P < 0.001); the distance between the IP and inferior aspects of posterior arch was significantly associated with age (B = - 0.002, P = 0.035), BMI (B = - 0.007, P = 0.028), sagittal length of posterior arch (B = - 0.187, P = 0.032), pedicle height (B = - 0.392, P < 0.001), and middle and lower parts of posterior arch (B = 0.862, P < 0.001). CONCLUSION: The incidence of posterior arch variation in BI patients without AO was remarkably higher than that in control patients. The insertion parameters of posterior screws were different between the morphological classification types in BI and control groups. The distance between VA V3 segments and VAG in BI cohort was substantially smaller than that in control cohort. Preoperative individual 3D computed tomography (CT), CT angiography and intraoperative navigation are recommended for BI patients receiving posterior screw placement.

Clinical application of spinal robot in cervical spine surgery: safety and accuracy of posterior pedicle screw placement in comparison with conventional freehand methods.

The novel robot-assisted (RA) technique has been utilized increasingly to improve the accuracy of cervical pedicle screw placement. Although the clinical application of the RA technique has been investigated in several case series and comparative studies, the superiority and safety of RA over conventional freehand (FH) methods remain controversial. Meanwhile, the intra-pedicular accuracy of the two methods has not been compared for patients with cervical traumatic conditions. This study aimed to compare the rate and risk factors of intra-pedicular accuracy of RA versus the conventional FH approach for posterior pedicle screw placement in cervical traumatic diseases. A total of 52 patients with cervical traumatic diseases who received cervical screw placement using RA (26 patients) and FH (26 patients) techniques were retrospectively included. The primary outcome was the intra-pedicular accuracy of cervical pedicle screw placement according to the Gertzbin-Robbins scale. Secondary outcome parameters included surgical time, intraoperative blood loss, postoperative drainage, postoperative hospital stay, and complications. Moreover, the risk factors that possibly affected intra-pedicular accuracy were assessed using univariate analyses. Out of 52 screws inserted using the RA method, 43 screws (82.7%) were classified as grade A, with the remaining 7 (13.5%) and 2 (3.8%) screws classified as grades B and C. In the FH cohort, 60.8% of the 79 screws were graded A, with the remaining screws graded B (21, 26.6%), C (8, 10.1%), and D (2, 2.5%). The RA technique showed a significantly higher rate of optimal intra-pedicular accuracy than the FH method (P = 0.008), but there was no significant difference between the two groups in terms of clinically acceptable accuracy (P = 0.161). Besides, the RA technique showed remarkably longer surgery time, less postoperative drainage, shorter postoperative hospital stay, and equivalent intraoperative blood loss and complications than the FH technique. Furthermore, the univariate analyses showed that severe obliquity of the lateral atlantoaxial joint in the coronal plane (P = 0.003) and shorter width of the lateral mass at the inferior margin of the posterior arch (P = 0.014) were risk factors related to the inaccuracy of C1 screw placement. The diagnosis of HRVA (P < 0.001), severe obliquity of the lateral atlantoaxial joint in the coronal plane (P < 0.001), short pedicle width (P < 0.001), and short pedicle height (P < 0.001) were risk factors related to the inaccuracy of C2 screw placement. RA cervical pedicle screw placement was associated with a higher rate of optimal intra-pedicular accuracy to the FH technique for patients with cervical traumatic conditions. The severe obliquity of the lateral atlantoaxial joint in the coronal plane independently contributed to high rates of the inaccuracy of C1 and C2 screw placements. RA pedicle screw placement is safe and useful for cervical traumatic surgery.

Medium and long-term radiographic and clinical outcomes of Dynesys dynamic stabilization versus instrumented fusion for degenerative lumbar spine diseases.

BACKGROUND: Dynesys stabilization (DS) is utilized to preserve mobility at the instrumental segments and prevent adjacent segment pathology in clinical practice. However, the advantages of DS method in medium and long-term follow-up remain controversial. OBJECTIVE: To compare the radiographic and clinical outcomes between DS and instrumented fusion in the treatment of degenerative lumbar spine disease with or without grade I spondylolisthesis with a minimum follow-up period of 2 years. METHODS: We conducted a comprehensive search of PubMed, EMBASE, Cochrane, and Web of Science databases, Chinese National Knowledge Databases, and Wanfang Database for potentially eligible articles. Clinical outcomes were assessed in terms of VAS and ODI scores, screw loosening and breakage, and surgical revision. Radiographic outcomes were assessed in terms of postoperative range of movement (ROM) and disc heigh. Moreover, adjacent segment degeneration (ASDeg) and adjacent segment disease (ASDis) were evaluated. RESULTS: Seventeen studies with 1296 patients were included in the meta-analysis. The DS group was associated with significantly lower postoperative VAS scores for low-back and leg pain, and lower rate of surgical revision than the fusion group. Moreover, the Dynesys group showed significantly less ASDeg than the fusion group but showed no significant advantage over the fusion group in terms of preventing ASDis. Additionally, the ROM at the stabilized segments of the fusion group decreased significantly and that at the adjacent segments increased significantly compared with those of the DS group. CONCLUSION: DS showed comparable clinical outcomes and provided benefits in preserving the motion at the stabilized segments, thus limiting the hypermobility at the adjacent segments and preventing ASDeg compared with the fusion method in degenerative disease with or without grade I spondylolisthesis.

Which Indicator Among Lumbar Vertebral Hounsfield Unit, Vertebral Bone Quality, or Dual-Energy X-Ray Absorptiometry-Measured Bone Mineral Density Is More Efficacious in Predicting Thoracolumbar Fragility Fractures?

OBJECTIVE: Hounsfield units (HU), vertebral bone quality (VBQ), and bone mineral density (BMD) can all serve as predictive indicators for thoracolumbar fragility fractures. This study aims to explore which indicator provides better risk prediction for thoracolumbar fragility fractures. METHODS: Patients who have received medical attention from The First Affiliated Hospital of Anhui Medical University for thoracolumbar fragility fractures were selected. A total of 78 patients with thoracolumbar fragility fractures were included in the study. To establish a control group, 78 patients with degenerative spinal diseases were matched to the fracture group on the basis of gender, age, and body mass index. The lumbar vertebral HU, the VBQ, and the BMD were obtained for all the 156 patients through computed tomography, magnetic resonance imaging, and dual-energy x-ray absorptiometry (DEXA). The correlations among these parameters were analyzed. The area under curve (AUC) analysis was employed to assess the predictive efficacy and thresholds of lumbar vertebral HU, VBQ, and BMD in relation to the risk of thoracolumbar fragility fractures. RESULTS: Among the cohort of 156 patients, lumbar vertebral HU exhibited a positive correlation with BMD (p < 0.01). Conversely, VBQ showed a negative correlation with HU, BMD (p < 0.05). HU and BMD displayed a favorable predictive efficacy for thoracolumbar fragility fractures (p < 0.01), with HU (AUC = 0.863) showcasing the highest predictive efficacy, followed by the DEXA-measured BMD (AUC = 0.813). VBQ (AUC = 0.602) ranked lowest among the 3 indicators. The thresholds for predicting thoracolumbar fragility fractures were as follows: HU (88),VBQ (3.37), and BMD (0.81). CONCLUSION: All 3 of these indicators, HU, VBQ, and BMD, can predict thoracolumbar fragility fractures. Notably, lumbar vertebral HU exhibits the highest predictive efficacy, followed by the BMD obtained through DEXA scanning, with VBQ demonstrating the lowest predictive efficacy.

Ferroptosis: A potential target for the intervention of intervertebral disc degeneration.

Ferroptosis, an iron-dependent form of programmed cell death marked by phospholipid peroxidation, is regulated by complex cellular metabolic pathways including lipid metabolism, iron balance, redox homeostasis, and mitochondrial activity. Initial research regarding the mechanism of ferroptosis mainly focused on the solute carrier family 7 member 11/glutathione/glutathione peroxidase 4 (GPX4) signal pathway. Recently, novel mechanisms of ferroptosis, independent of GPX4, have been discovered. Numerous pathologies associated with extensive lipid peroxidation, such as drug-resistant cancers, ischemic organ injuries, and neurodegenerative diseases, are driven by ferroptosis. Ferroptosis is a new therapeutic target for the intervention of IVDD. The role of ferroptosis in the modulation of intervertebral disc degeneration (IVDD) is a significant topic of interest. This is a novel research topic, and research on the mechanisms of IVDD and ferroptosis is ongoing. Herein, we aim to review and discuss the literature to explore the mechanisms of ferroptosis, the relationship between IVDD and ferroptosis, and the regulatory networks in the cells of the nucleus pulposus, annulus fibrosus, and cartilage endplate to provide references for future basic research and clinical translation for IVDD treatment.

Predictors of accurate intrapedicular screw placement in single-level lumbar (L4-5) fusion: robot-assisted pedicle screw, traditional pedicle screw, and cortical bone trajectory screw insertion.

BACKGROUND: The superiorities in proximal facet joint protection of robot-assisted (RA) pedicle screw placement and screw implantation via the cortical bone trajectory (CBT) have rarely been compared. Moreover, findings on the screw accuracy of both techniques are inconsistent. Therefore, we analyzed the screw accuracy and incidence of facet joint violation (FJV) of RA and CBT screw insertion in the same study and compared them with those of conventional pedicle screw (PS) insertion. The possible factors affecting screw accuracy and FJV were also analyzed. METHODS: A total of 166 patients with lumbar degenerative diseases requiring posterior L4-5 fusion were retrospectively included and divided into the RA, PS, and CBT groups from March 2019 to December 2021. The grades of intrapedicular accuracy and superior FJV were evaluated according to the Gertzbin-Robbins scale and the Babu scale based on postoperative CT. Univariable and multivariable analyses were conducted to assess the possible risk factors associated with intrapedicular accuracy and superior FJV. RESULTS: The rates of optimal screw insertion in the RA, PS, and CBT groups were 87.3%, 81.3%, and 76.5%, respectively. The difference between the RA and CBT groups was statistically significant (P = 0.004). Superior FJVs occurred in 28.2% of screws in RA, 45.0% in PS, and 21.6% in CBT. The RA and CBT groups had fewer superior FJVs than the PS group (P = 0.008 and P < 0.001, respectively), and no significant difference was observed between the RA and CBT groups (P = 0.267). Multivariable analysis revealed that the CBT technique was an independent risk factor for intrapedicular accuracy. Furthermore, older age, the conventional PS technique and a smaller facet angle were independently associated with the incidence of superior FJVs. CONCLUSIONS: The RA and CBT techniques were associated with fewer proximal FJVs than the PS technique. The RA technique showed a higher rate of intrapedicular accuracy than the CBT technique. The CBT technique was independently associated with screw inaccuracy. Older age, conventional PS technique and coronal orientation of the facet join were independent risk factors for superior FJV.

Rates and risk factors of intrapedicular accuracy and cranial facet joint violation among robot-assisted, fluoroscopy-guided percutaneous, and freehand techniques in pedicle screw fixation of thoracolumbar fractures: a comparative cohort study.

BACKGROUND: Robot-assisted (RA) technique has been increasingly applied in clinical practice, providing promising outcomes of inserting accuracy and cranial facet joint protection. However, studies comparing this novel method with other assisted methods are rare, and the controversy of the superiority between the insertion techniques remains. Thus, we compare the rates and risk factors of intrapedicular accuracy and cranial facet joint violation (FJV) of RA, fluoroscopy-guided percutaneous (FP), and freehand (FH) techniques in the treatment of thoracolumbar fractures. METHODS: A total of 74 patients with thoracolumbar fractures requiring pedicle screw instruments were retrospectively included and divided into RA, FP, and FH groups from June 2016 to May 2020. The primary outcomes were the intrapedicular accuracy and cranial FJV. The factors that affected the intrapedicular accuracy and cranial FJV were assessed using multivariate analyses. RESULTS: The optimal intrapedicular accuracy of pedicle screw placement (Grade A) in the RA, FP, and FH groups was 94.3%, 78.2%, and 88.7%, respectively. This finding indicates no significant differences of RA over FH technique (P = 0.062) and FP technique (P = 0.025), but significantly higher accuracies of RA over FP (P < 0.001). In addition, the rates of proximal FJV in RA, FP, and FH groups were 13.9%, 30.8%, and 22.7%, respectively. RA had a significantly greater proportion of intact facet joints than the FP (P = 0.002). However, FP and FH (P = 0.157), as well as RA and FH (P = 0.035) showed significantly similar outcomes with respect to the proximal FJV. The logistic regression analysis showed that FP technique (OR = 3.056) was independently associated with insertion accuracy. Meanwhile, the age (OR = 0.974), pedicle angle (OR = 0.921), moderate facet joint osteoarthritis (OR = 5.584), and severe facet joint osteoarthritis (OR = 11.956) were independently associated with cranial FJV. CONCLUSION: RA technique showed a higher rate of intrapedicular accuracy and a lower rate of cranial FJV than FP technique, and similar outcomes to FH technique in terms of intrapedicular accuracy and cranial FJV. RA technique might be a safe method for pedicle screw placement in thoracolumbar surgery. LEVEL OF EVIDENCE: 3.

Characteristics and Comparisons of Morphometric Measurements and Computed Tomography Hounsfield Unit Values of C2 Laminae for Translaminar Screw Placement Between Patients With and Without Basilar Invagination.

OBJECTIVE: Patients with basilar invagination (BI) had high incidences of vertebral variations and high-riding vertebral artery (HRVA) that might restrict the use of pedicle or pars screw and increase the use of translaminar screw on axis. Here, we conducted a radiographic study to investigate the feasibility of translaminar screws and the bone quality of C2 laminae in patients with BI, which were compared with those without BI as control to provide guidelines for safe placement. METHODS: In this study, a total of 410 patients (205 consecutive patients with BI and 205 matched patients without BI) and 820 unilateral laminae of the axis were included at a 1:1 ratio. Comparisons with regard to insertion parameters (laminar length, thickness, angle, and height) for C2 translaminar screw placement and Hounsfield unit (HU) values for the assessment of the appropriate bone mineral density of C2 laminae between BI and control groups were performed. Besides, the subgroup analyses based on the Goel A and B classification of BI, HRVA, atlas occipitalization, and C2/3 assimilation were also carried out. Furthermore, the factors that might affect the insertion parameters and HU values were explored through multiple linear regression analyses. RESULTS: The BI group showed a significantly smaller laminar length, thickness, height, and HU value than the control group, whereas no significant difference was observed regarding the laminar angle. By contrast, the control group showed significantly higher rates of acceptability for unilateral and bilateral translaminar screw fixations than the BI group. Subgroup analyses showed that the classification of Goel A and B, HRVA, atlas occipitalization, and C2/3 assimilation affected the insertion parameters except the HU values. Multiple linear regression indicated that the laminar length was significantly associated with the male gender (B = 0.190, p < 0.001), diagnoses of HRVA (B = -0.109, p < 0.001), Goel A (B = -0.167, p < 0.001), and C2/3 assimilation (B = -0.079, p = 0.029); the laminar thickness was significantly associated with the male gender (B = 0.353, p < 0.001), diagnoses of HRVA (B = -0.430, p < 0.001), Goel B (B = -0.249, p = 0.026), and distance from the top of odontoid to the Chamberlain line (B = -0.025, p = 0.003); laminar HU values were significantly associated with age (B = -2.517, p < 0.001), Goel A (B = -44.205, p < 0.001), Goel B (B = -25.704, p = 0.014), and laminar thickness (B = -11.706, p = 0.001). CONCLUSION: Patients with BI had narrower and smaller laminae with lower HU values and lower unilateral and bilateral acceptability for translaminar screws than patients without BI. Preoperative 3-dimensional computed tomography (CT) and CT angiography were needed for BI patients.

The Rates and Risk Factors of Intra-Pedicular Accuracy and Proximal Facet Joint Violation for Single-Level Degenerative Lumbar Diseases: Cortical Bone Trajectory Versus Traditional Trajectory Pedicle Screw.

STUDY DESIGN: A retrospective study. OBJECTIVE: To compare the accuracy of pedicle screw placement and proximal facet joint violation (FJV) in single-level degenerative lumbar diseases using cortical bone trajectory (CBT) and traditional trajectory (TT) techniques, and analyze their possible risk factors. SUMMARY OF BACKGROUND DATA: CBT screws have been utilized increasingly to improve cortical bone contact to prevent screw pullout and reduce approach-related morbidity. However, the studies on intra-pedicular accuracy and proximal FJV between the two methods are rare. METHODS: A total of 40 patients who required single-level instruments were included in the retrospective study treated with the CBT-TLIF and the TT-TLIF at a 1:1 ratio from March 2019 to August 2020. The radiographic outcomes were the intra-pedicular accuracy and proximal FJV. Moreover, the possible risk factors were assessed using bivariate and multivariate analyses. RESULTS: As for the intra-pedicular accuracy, 73 screws (91.3%) were classified as grade A, 7 screws (8.7%) classified as grade B in the CBT group. A total of 71 screws (88.8%) were graded A with remaining 8 screws (10.0%) graded B and 1 screw (1.2%) graded C in the TT group. The proportion of optimal and clinically acceptable screw positions in the two groups were not significantly different (P > 0.05). In addition, the rate of proximal FJV in CBT approach (8.3%) was significantly lower than that in the TT approach (35.0%) (P < 0.001). Multivariate analysis showed the TT insertion approach and facet angle ≥45° were the independent risk factors for proximal FJV, but no factors above affected intra-pedicular accuracy. CONCLUSION: Compared with the TT approach in TLIF, the CBT approach showed similar intra-pedicular accuracy and remarkable superiority in proximal facet joint protection. Facet angle ≥45° is the independent risk factors for proximal FJV.Level of Evidence: 2.

Associations between the hounsfield unit values of different trajectories and bone mineral density of vertebrae: cortical bone and traditional trajectories.

Cortical bone trajectory (CBT) is widely used in orthopedic surgery to improve fixation while minimizing soft tissue dissection. This study used radiological methods to assess the correlation between the bone mineral density (BMD) of vertebrae and Hounsfield unit (HU) values of CBT and traditional trajectory (TT). A total of 240 thoracic and lumbar (T9-L5) vertebrae from 40 cadaveric spines were obtained. The specimens were measured using computed tomography (CT). The axial CT images of TT were sliced in a plane horizontal to the pedicle, whereas those of CBT were sliced in a caudocranial plane. The regions of interest of TT and CBT were selected to calculate an average HU value within the area, wherein the screws were inserted and fixed at 6.0 mm × 40 mm and 4.0 mm × 30 mm, respectively. The BMD of vertebrae was measured by dual-energy X-ray absorptiometry (DEXA) and quantitative CT (QCT). The HU value of CBT (286.74 ± 120.80) was almost twice higher than that of TT (165.61 ± 92.38). The average lateral and anteroposterior BMDs of 240 vertebrae determined using DEXA were 0.540 ± 0.193 and 0.651 ± 0.180 g/cm2, respectively. The average cortical and cancellous BMDs of 240 vertebrae determined using QCT were 245.63 ± 80.09 and 88.24 ± 61.78 mg/cm3, respectively. The BMD determined using DEXA and QCT was significantly and positively associated with the HU values of CBT and TT. The ratio of the HU values of CBT and TT was significantly and negatively associated with the lateral BMD determined using DEXA and the cancellous BMD determined using QCT. However, it was significantly and positively associated with segments but not with the anteroposterior BMD determined using DEXA and the cortical BMD determined using QCT. Collectively, the HU values of CBT and TT significantly decreased with decreasing BMD. However, the CBT HU values significantly decreased less than the TT HU values, especially in low-BMD vertebrae and cauda lumbar segments.

Cortical bone trajectory screws used to save failed traditional trajectory screws in the osteoporotic lumbar spine and vice versa: a human cadaveric biomechanical study.

OBJECTIVETraditional trajectory (TT) screws are widely used in lumbar fixation. However, they may require revision surgery in some instances, especially in patients with osteoporotic spines. Cortical bone trajectory (CBT) screws may potentially be used to rescue a failed TT screw and vice versa in nonosteoporotic spines. This study aimed to investigate whether a CBT screw can salvage a compromised TT screw in osteoporotic lumbar spines and vice versa.METHODSA total of 42 vertebrae from 17 cadaveric lumbar spines were obtained. Bone mineral density was measured, and a CBT screw was randomly inserted into one side of each vertebra. A TT screw was then inserted into the contralateral side. The biomechanical properties of the screws were tested to determine their insertional torque, pullout strength, and fatigue performance. After checking the screws for the failure of each specimen, the failed screw track was salvaged with a screw of the opposite trajectory. The specimen was then subjected to the same mechanical tests, and results were recorded. A repeat pullout test on TT and CBT screws was also performed.RESULTSWhen CBT screws were used to rescue failed TT screws, the original torque increased by 50%, an average of 81% of the pullout strength of the initial TT screws was retained, and the fatigue performance was equal to that of the original screws, which were considerably stronger than the loose TT screws-that is, the TT repeat screws/TT screws were 33% of the pullout strength of the initial TT screws. When the TT screws were used to salvage the compromised CBT screws, the TT screws retained 51% of the original torque and 54% of the original pullout strength, and these screws were still stronger than the loose CBT screws-that is, the loose CBT screws retained 12% pullout strength of the initial CBT screws. Fatigue performance and the ratio of the pullout strength considerably decreased between the CBT rescue screws and the original CBT screws but slightly changed between the TT rescue screws and the original TT screws.CONCLUSIONSCBT and TT screws can be applied in a revision technique to salvage each other in osteoporotic lumbar spines. Additionally, CBT and TT screws each retain adequate insertional torque, pullout strength, and fatigue performance when used for revision in osteoporotic lumbar spines.

New vertebral fractures after osteoporotic vertebral compression fracture between balloon kyphoplasty and nonsurgical treatment PRISMA.

BACKGROUND: Because of aging of population, osteoporotic vertebral compression fracture (OVCF) appears an increasing incidence rate. Conservative therapy (CT) and balloon kyphoplasty (BKP) have been used to treat OVCFs. However, an increase in new vertebral compression fractures at nontreated levels following BKP is of concern. It is still not clear whether new fractures were a result of BKP and the purpose of this meta-analysis was to evaluate the new fractures risk after BKP compared with CT. METHODS: An exhaustive literature search of PubMed, EMBASE, and the Cochrane Library was conducted to identify randomized controlled trials and prospective nonrandomized controlled study that compared BKP with CT for patients suffering OVCF. A random-effect model was used. Results were reported as standardized mean difference or risk ratio with 95% confidence interval. RESULTS: Twelve studies were included and there was no significant difference in total new fractures (P = .33) and adjacent fractures (P = .83) between 2 treatments. Subgroup analyses did not demonstrate significant differences in follow-up period, mean age, anti-osteoporosis therapy, and the proportion of women. CONCLUSION: Our systematic review revealed that an increased risk of fracture of vertebral bodies was not associated with BKP compared with CT.

Biomechanical Fixation Properties of the Cortical Bone Trajectory in the Osteoporotic Lumbar Spine.

OBJECTIVE: Selecting optimal strategies for improving fixation in osteoporotic lumbar spine is an important issue in clinical research. Cortical bone trajectory (CBT) screws have been proven to enhance screw pullout strength, but biomechanical efficacy of these screws remains understudied. The aim of this study was to evaluate biomechanical efficacy of CBT screws in osteoporotic lumbar spine. METHODS: Thirty-one vertebrae from 14 cadaveric lumbar spines were obtained. All specimens were measured by computed tomography; the diameter of pedicles, excluding those of vertebral bodies with very small pedicle developments, was calculated. After measuring bone mineral density, the CBT screw was randomly inserted into 1 side, and the traditional trajectory (TT) screw was inserted into the contralateral side. Maximum insertional torque was recorded after screw insertion. Of vertebrae, 21 were subjected to pullout testing at a rate of 5 mm/minute, and 10 were subjected to cyclic fatigue testing. Each construct was loaded until exceeding 5 mm. RESULTS: Average bone mineral density was 0.567 ± 0.101 g/cm2. CBT screws had higher maximum insertional torque (degrees of freedom = 30, t = 5.78, P < 0.001, 0.333 N-m vs. 0.188 N-m) and higher axial pullout strength (degrees of freedom = 20, t = 7.41, P < 0.001, 394 N vs. 241 N) than TT screws. Increased bone mineral density was not significantly associated with higher pullout load. Compared with TT screws, CBT screws showed better resistance to fatigue testing and required more cycles to exceed 5 mm (degrees of freedom = 9, t = 5.62, P < 0.001, 6161 cycles vs. 3639 cycles). Failure load for displacing screws was also significantly greater for CBT screws than for TT screws (degrees of freedom = 9, t = 5.75, P < 0.001, 443 N vs. 317 N). CONCLUSIONS: CBT screws had better biomechanical fixation in osteoporotic lumbar spine compared with standard pedicle screws.